Thursday 30 December 2010

Ultimate Tennant Suit - time to get picky

As you may have read, I am about to make the Ultimate Tennant Suit, using half a dozen pairs of the original GAP trousers.

But before I can start any pattern cutting proper, I need to harvest the usable pieces of fabric from the trousers, so I can see what I have to work with.

To start with I tried unpicking the stitching of the legs, but quickly found that the seams are double-stitched for strength, so don’t come apart that easily. The edges of the fabric is also overlocked to stop the edges fraying, so even if I could remove all the stitching, it would leave the edges unusable as they will be peppered with holes.

I then found that by cutting the seams along the outside of the stitch-line, they easy come apart.

At the tops of the trousers there really is little point trying to rescue anything above the back pockets. There is nothing on the suit that I could make from fabric that small in size, so I cut across the tops of the leg as close to the pockets as I possibly can (see above).

I then do the same around the fronts between the fly and the side pockets (see left).

Friday 17 December 2010

Merry Christmas to all my readers!

I can’t believe a year has flown by since I last wished everyone a Happy Christmas.


Looking back though, a lot has happened and I’ve completed or started a number of amazing projects.

From updating my Tennant Coat; making a Five Coat or two; starting a replica Tennant suit jacket using original GAP Trousers; making a couple of Inverness Capes (must get round to writing that up!); as well as some smaller item such as Five Hatbands, Six Cravats and Seven Hankies.
However, I think the most exciting has been starting work on a replica Six Frock Coat, which I am so looking forward to getting done next year.

I hope you’ll join me in the following months as it starts to come together.